New upper body measurements

It's easy and only takes 5 minutes to get your measurements. Just follow the instructions and you will get a perfect fit. Gone are the days of ill-fitting standard sized clothes.

Get started by filling in your height and weight. We will then calculate your measurements.

lbs

Neck circumference

Measure around the lower part of the neck. Put one finger between the measuring tape and the neck.

Shoulder width

Measure between the outermost edges of the shoulders. Good reference points for the start and end are the seams on the edge of the shoulders. Measure across, close to the lowest part of the shirt collar.

Chest circumference

Measure around the chest where it is largest, right across the nipples. Breathe normally. Note that this measurement should be taken with a finger inside the measuring tape.

Stomach circumference

Measure around the stomach, in line with the navel. Breathe normally. Note that this measurement should be taken with a finger inside the measuring tape.

Buttocks

Measure around the largest point of the buttocks. Note that this measurement should be taken with a finger inside the measuring tape.

Jacket length

Start at the middle of the shoulder. A good reference for the starting point is the shoulder seam of your shirt. Measure straight down to the middle of the thumb, or where you want the jacket to end. Breathe normally.

Shirt length

Start at the middle of the shoulder. A good reference for the starting point is the shoulder seam of your shirt. Measure straight down to the middle of the thumb, or where you want the shirt to end. Breathe normally.

This field is not required for all our products, but you can add it for your own convenience.

Bicep

Measure around the widest part of the bicep. Let your arm hang relaxed down by your side. Note that this measurement should be taken with a finger inside the measuring tape.

Jacket sleeve length

From the outermost edge of the shoulder, same point as the shoulder measurement, measure down to the start of the thumb. The arm should hang straight down.

Shirt sleeve length

From the outermost edge of the shoulder, same point as the shoulder measurement, measure down to the start of the thumb. The arm should hang straight down. For best style, ensure your shirt sleeve length is about an inch or 2 cm longer than your jacket sleeve length.

This field is not required for all our products, but you can add it for your own convenience.

Wrist

Measure around the wrist directly below the wrist joint. Note that this measurement should be taken with a finger inside the measuring tape.

Waistcoat length

Start at the middle of the shoulder. A good reference for the starting point is the shoulder seam of your shirt. Measure straight down to the waistline of your trousers. Measured this way the waistline of the trousers will be right below the lowest button on the waistcoat.

This field is not required for all our products, but you can add it for your own convenience.

Dress coat front length

Start at the middle of the shoulder. A good reference for the starting point is the shoulder seam of your shirt. Measure straight down to the waistline of your trousers.

This field is not required for all our products, but you can add it for your own convenience.

Morning coat front

Start at the middle of the shoulder. A good reference for the starting point is the shoulder seam of your shirt. Measure straight down to the middle of the thumb.

This field is not required for all our products, but you can add it for your own convenience.

Coat tail length

Start at the middle of the shoulder. A good reference for the starting point is the shoulder seam of your shirt. Measure down to the back of your knee, or where you want the tail to end.

This field is not required for all our products, but you can add it for your own convenience.

Frock coat waistline

Start at the middle of the shoulder. A good reference for the starting point is the shoulder seam of your shirt. Measure down to the navel, or where you want the frock coat waistline to be.

This field is not required for all our products, but you can add it for your own convenience.

Frock coat length

Start at the middle of the shoulder. A good reference for the starting point is the shoulder seam of your shirt. Measure down to the top of your knee cap, or where you want the frock coat to end.

This field is not required for all our products, but you can add it for your own convenience.

Summary

Please confirm your measurements and save your measurement profile.

Measurement profile name